CHT QSIL 550 250G QSIL 250G Silicone RTV Encapsulant Tub Grey 250 g
QSil 550 2-part series are 100% silicone solids elastomer designed for electronic potting and encapsulation applications. This two component system offers a flame retardant, thermally conductive, low modulus material that is readily repairable. It is designed for potting electronics to provide environmental protection (e.g. sterilization units). Suitable for higher working temperatures.
- Long pot life, low modulus and good elongation
- Approval is UL94 V0 file No. E205830
- Colour is beige/black
- Cure profile is 7minutes at 150°C
- Density is 1.41 (BS ISO 2781), cure type is addition
- Gel time at 25°C/77°F is 130minute, mix ratio by weight is 1:1
- Colour is grey, weight is 250g
- Working temperature is -55°C minimum, 275°C maximum
- Tensile strength is 3.52N/mm²/510psi (ISO 37), dielectric constant is 3.12 (ASTM D-150)
- Dielectric strength is 20.3kV/mm/516V/mil (ASTM D-149), shelf life is 24months
Other details
| Brand | CHT |
| Part Number | QSIL 550 250G |
| Quantity | Each |
| Technical Data Sheet EN |  |
| Safety Data Sheet EN | |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
$113.86
CHT QSIL 550 250G QSIL 250G Silicone RTV Encapsulant Tub Grey 250 g—
$113.86
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
QSil 550 2-part series are 100% silicone solids elastomer designed for electronic potting and encapsulation applications. This two component system offers a flame retardant, thermally conductive, low modulus material that is readily repairable. It is designed for potting electronics to provide environmental protection (e.g. sterilization units). Suitable for higher working temperatures.
- Long pot life, low modulus and good elongation
- Approval is UL94 V0 file No. E205830
- Colour is beige/black
- Cure profile is 7minutes at 150°C
- Density is 1.41 (BS ISO 2781), cure type is addition
- Gel time at 25°C/77°F is 130minute, mix ratio by weight is 1:1
- Colour is grey, weight is 250g
- Working temperature is -55°C minimum, 275°C maximum
- Tensile strength is 3.52N/mm²/510psi (ISO 37), dielectric constant is 3.12 (ASTM D-150)
- Dielectric strength is 20.3kV/mm/516V/mil (ASTM D-149), shelf life is 24months
Other details
| Brand | CHT |
| Part Number | QSIL 550 250G |
| Quantity | Each |
| Technical Data Sheet EN | |
| Safety Data Sheet EN | |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
