Dfrobot DFR0626 DFR0626 I/O Expansion Module Gravity 16 Digital Arduino Board
DFR0626 is a Gravity: MCP23017 I2C 16 digital IO expansion module. This Gravity: MCP23017 I2C IO 16 digital IO expansion module has 2 groups of IO pins, GPIOA and GPIOB. Each group has 8 independent IO interfaces, and each IO interface can be set to input, output, pull-up input (connect to 100KR pull-up resistor), interrupt and so on.
- Supporting to expand 128 IOs at most
- Multiple IO mode
- Changeable I2C address by dial switch
- Multiple VCC and GND pins leaded
- Compatible with both 3.3V and 5V
- Operating voltage range from 3.3V to 5.5V
- Dimension is 44x32mm / 1.73x1.26inch
Gravity: MCP23017 I2C 16 digital IO expansion module x1, Gravity-4P I2C/UART wire x1.
Product details
| Accessory Type | 16 Digital IO Expansion Module |
| For Use With | Arduino Board |
| Product Range | - |
Other details
| Brand | DFROBOT |
| Part Number | DFR0626 |
| Quantity | Each |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
$3.84
Original: $12.80
-70%Dfrobot DFR0626 DFR0626 I/O Expansion Module Gravity 16 Digital Arduino Board—
$12.80
$3.84Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
DFR0626 is a Gravity: MCP23017 I2C 16 digital IO expansion module. This Gravity: MCP23017 I2C IO 16 digital IO expansion module has 2 groups of IO pins, GPIOA and GPIOB. Each group has 8 independent IO interfaces, and each IO interface can be set to input, output, pull-up input (connect to 100KR pull-up resistor), interrupt and so on.
- Supporting to expand 128 IOs at most
- Multiple IO mode
- Changeable I2C address by dial switch
- Multiple VCC and GND pins leaded
- Compatible with both 3.3V and 5V
- Operating voltage range from 3.3V to 5.5V
- Dimension is 44x32mm / 1.73x1.26inch
Gravity: MCP23017 I2C 16 digital IO expansion module x1, Gravity-4P I2C/UART wire x1.
Product details
| Accessory Type | 16 Digital IO Expansion Module |
| For Use With | Arduino Board |
| Product Range | - |
Other details
| Brand | DFROBOT |
| Part Number | DFR0626 |
| Quantity | Each |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
